Foshan wholesale price of automatic terminal machine

The ultra-high-speed silent peeling and tapping machine in the workshop is a fixed asset. The use date is March 2012, and the life span is 10 years. Its original value is 18,000 yuan. It is a general enterprise production equipment. /span>Strip terminal machineThe straight-line method is used to accrue depreciation, and the monthly depreciation amount=18000*(1- 3%)/10/12=145.50. The use date is from March 2012 to July 2013, which is 9+7=16 months, and the depreciation amount in July 2013=145.5*16=2328 yuan.

The advanced structure design of the automatic terminal machine: Breaking the traditional meaning of the automatic mechanical work flow layout, the cutting, stripping, end punching, and twisting are highly integrated in a straight line. Greatly increase work efficiency and product quality. 3. The automatic terminal machine has a stable structure and low cost of use: As it effectively reduces the large-span cooperation between personnel and various departments in the traditional operation process, the mechanical transmission running-in is reduced, and the unstable factors are greatly reduced. The simplification of the structure greatly reduces the follow-up maintenance cost. So as to produce products more quickly.

JulunFully automatic terminal machineClosing height (Pressing height) adjustment: When the closing height of the automatic terminal machine is not suitable or the adjustment of the mold pressing height micro-adjuster plate is not enough, it can be realized by adjusting the adjustment joint and loosening the round nut. Insert the adjusting rod into the round hole on the adjusting joint and turn it. Turning left will decrease the pressing height, and turning right will increase the pressing height (the engraved line on the adjusting joint is 0.1mm per grid, and one turn is 3mm). From high to low, adjust to the proper compression of the wires and terminals. It should not be too tight. Too tight will easily damage the upper and lower die blades.

Continuous stripping terminal machine: The continuous stripping terminal machine belongs to the semi-active model. It has the function of active peeling and crimping terminals. After manual feeding, the foot pedal power switch is controlled to complete the operation. The output power is relatively high. The machine has the functions of active peeling and crimping. During the operation, manual feeding is required, and the pedal method is required, and the production power is high. The quotation is cheaper than the quotation of all active terminal machines.

What is the working principle of the new terminal machine? 1. (Principle) The motor keeps rotating. There is a breaker inside with a clutch, and every time it is moved, an "O" marked with preparation comes out, which is very common. 2. In the past five years, there has been a (silent) terminal machine with a server. Its operating principle is different from the above. It only sends a message to the server, which is then transmitted to the motor to complete an action. Fully automatic terminal machine: As long as the wire is put on, the terminal mold is set up, and the parameters are set in the screen, it can be produced.

How to install the new terminal machine and automatic terminal machine? ①Put the qualified terminals on the terminal frame as required, and install the terminal chain head into the equipment according to the correct method. ②Confirm that the die of the equipment matches the installed terminal, then adjust the pressure and other parameters of the equipment, and adjust the corresponding position of the terminal chain and the equipment. ③Take the stripped wire and check for defects, then align the wire with the slot of the terminal machine and the terminal opening, adjust the position, and then step on the pedal with your foot to place the terminal on the wire.

Foshan wholesale price of automatic terminal machine

The stripper and terminal machine must be shut down when adjusting and replacing the paper cutter. Even when the machine is stopped, it is strictly forbidden to put your hands under the knife to change the knife. Long-handled bolts and other tools should be used to change the knife. They must be removed during the test run to avoid injury to the operator when the machine is started. 2. The power supply must be blocked when the stripping terminal machine is adjusted, the blade is exchanged, and when repairing, refueling, scrubbing and inspection.

Foshan wholesale price of automatic terminal machine

The automatic terminal machine has won the favor of the majority of enterprises for its high efficiency, hands-free, high precision, and ultra-quiet advantages. Of course, 1653 must choose the right one according to the needs of your own business. Hope it helps you. For the application and principle of the terminal machine, please refer to the product data of Dongguan Julun Machinery Co., Ltd. Hope to help you all. Our company's products are mainly companies that include stripping and tapping machines and pressure monitoring. You are also warmly welcome to call and write to us for consultation.

Turn on the power switch of the automatic terminal, and the power indicator light is on. Pay attention to whether there are obvious abnormal noises inside and outside the machine. If the operation is suspended, ask the maintenance personnel to determine whether maintenance is required. Knife selection and installation: operated by designated personnel. Before installing the tool, you need to manually compare whether the selected tool matches. The tool can only be installed after the comparison is correct. After installing the tool, it must be tested manually.

Full-automatic parallel wire terminal machine. (It adopts PLC or single-chip control, servo motor or stepper motor to provide power. The production process does not require manual participation, and the production efficiency is high. This type of domestic equipment can realize about 7000pcs of wire cutting per hour and 11000pcs of terminal crimping. The mid-term is 3500pcs. Parallel wire crimping terminal, 7500pcs is a single wire crimping terminal, which can automatically detect the crimping quality of the terminal. It has the functions of the above three automatic terminal machines. It is one of the new terminal machines with a very good degree of automation in the domestic market.)

The automatic terminal machine checks whether the moving parts are normal. 5. When the mold is placed, a glue stick or cloth piece should be put on the knife edge to protect the tool. 6. Whether the marking is clear and can be one-to-one correspondence. 7. For receiving and issuing, the "Mold Entry and Exit Account Record Form" must be completed and completed. All of the above can be written into the "Homework Instructions", remember to include pictures. This is called perfection. The difference between the otp mold of the new terminal machine and the 2000 mold. Electronic mold is a kind of mold, mainly used in the electronic side. In short, a mold is a tool used to shape objects. This tool is composed of various parts, and different molds are composed of different parts.

Foshan wholesale price of automatic terminal machine

First, turn off the power of the automatic terminal machine, press the down touch button, and use the special board to manually move the master and slave wheels to greatly increase the original imported terminal pressure The punching stroke of the machine. If the hand does not move, consider whether the pressure is too high or there are other problems, check and adjust to normal. Before operation, check and confirm that the locking screws are not loose.

Foshan wholesale price of automatic terminal machine

The possible cause is that the wire feed wheel is too tight or too loose. At this time, we can fine-tune the gap between the two wheels with a steel wire roller, so that the steel wire will not become flat and too loose. The principle is roughly similar to the peel length. 2. Automatic terminal machine failure: bad crimping terminal bad crimping terminal may lead to complete crimping, or not reaching a better crimping position, resulting in bare copper wire. At this time, it is necessary to check whether the gun-type swing arm catheter is installed on the wire. Whether the terminal blade of the swing arm catheter is relatively straight; whether the auxiliary pressing block of the terminal is loose; check whether the interval between the terminal and the automatic machine has been changed.

Foshan wholesale price of automatic terminal machine

The automatic terminal machine pressure is too large or other problems, check and debug to OK. Before operation, check each locking screw and confirm that there is no looseness inside. When the blade of the automatic terminal machine undergoes 200,000 times of stamping, there will be a certain degree of wear. At this time, the riveted terminal may have defective products. The cutting blade of the equipment has experienced 1 million or even 2 million times. After the cutting and stripping, there will be certain hidden dangers. Therefore, in the use process of high-demand customers, it is necessary to strictly control the service life of the wearing parts, and the correct operation of the equipment can also reduce the loss.